Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

Version 1 Next »

Emergency Identifier

This section describes the enumeration for the Emergency identifiers. This enumeration is most likely generated with the "CANopen Config Tool".

Example:

This enumeration is used to get consistent and unique Emergency identifier for the CANopen device.

Note: The value of APP_EMCY_N shall be the same as CO_EMCY.N. This can't be checked with preprocessing, therefore for plausibility checking a small check at the startup of the application may ensure the correctness of this configuration.

End of topic

  • No labels