Directories and Files

This section discusses the modules available for μC/TFTPc, and how they all fit together. A Windows®-based development platform is assumed. The directories and files make references to typical Windows-type directory structures. However, since μC/TFTPc is available in source form, it can also be used with any ANSI-C compatible compiler/linker and Operating System.

Below is a summary of all directories and files involved in the µC/TFTPc module. The ‘<-Cfg’ on the far right indicates that these files are typically copied into the application (i.e., project) directory and edited based on project requirements.

\Micrium
	\Software
		\uC-TFTPc
			\Cfg
				\Template
					tftp-c_cfg.c	<-Cfg
					tftp-c_cfg.h	<-Cfg
			\Source
				tftp-c.c
				tftp-c.h
				tftp-c_type.h

\Micrium\Software\uC-TFTPc

This is the main directory for µC/TFTPc.

\Micrium\Software\uC-TFTPc\Cfg\Template

This directory contains a template of µC/TFTPc configuration.

\Micrium\Software\uC-TFTPc\Source

This directory contains the µC/TFTPc source code. This protocol is implemented in three FS independent files:

tftp-c.c
tftp-c.h
tftp-c_type.h

Note that the ‘-c’ after ‘tftp’ stands for client and thus contains ‘client’ side code.

Required modules

µC/TFTPc requires the µC/CPU, µC/LIB, µC/Common and µC/TCP-IP modules. Please refer to the µC/TFTPc release notes document for required version information.