Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.
Stopping a Network Device
NetDev_Stop() is called once each time an interface is stopped.
NetDev_Stop() must perform the following operations:
- Disable the receiver and transmitter.
- Disable all local MAC interrupt sources.
- Clear all local MAC interrupt status flags.
- Power down the wireless device via network device’s BSP function pointer, NetDev_WiFi_Stop().
- For wireless devices which can queued up packet to transmit, free all transmit buffer not yet transmitted by calling NetOS_IF_DeallocTaskPost() with the address of the transmit buffer data areas.
- Set perr to NET_DEV_ERR_NONE if no error occurs. Otherwise, set perr to an appropriate network device error code.
|
Some wireless module return result of commands via a response. The device’s Wireless Manager function pointer, NetWiFiMgr_Mgmt() should be used to perform these type of command since it will return only when the response is received and processed. |