Prerequisites
Before running your first application, you must ensure that you have the minimal set of required tools and components:
- Toolchain for your specific microcontroller.
- Development board.
- µC/TCP-IP stack must be installed properly (a running project). See Installing for further detail about how to install µC/TCP-IP.
- Source code for µC/HTTPs.
Additional Modules
µC/HTTPs depends on other modules to run. First, it needs the presence of a RTOS. Furthermore, µC/CPU, µC/LIB and µC/TCP-IP modules are required.
If you are using one of the two Micriµm OS, complete documentation can be found for µC/OS-II and µC/OS-III. Refer to those guides for more information on the requirements, installation, configuration and running of those RTOS.
The µC/CPU module regroups the processor's hardware-dependent code. µC/CPU includes many ports for all the different CPU architectures Micriµm supports. You must therefore used the port corresponding to your specific CPU. The complete µC/CPU documentation can be found here.
The µC/LIB module is the Micriµm run-time library, implementing the most common standard library functions, macros, and constants. The complete µC/LIB documentation can be found here.
The µC/TCP-IP stack is a compact, reliable, high-performance TCP/IP protocol stack which provide the socket to the HTTP application layer. The complete µC/TCP-IP documentation can be found here.
Downloading the source code
µC/HTTPs can be downloaded from the Micrium customer portal as all the other required modules. The distribution package includes the full source code and documentation.
Depending if you bought a package or individual components, either you would find uC/HTTPs source code with the µC/TCP-IP package or you would have to download the µC/HTTPs component from the customer portal.
You can log into the Micrium customer portal at the address below to begin your download (you must have a valid license to gain access to the file):
Installing the Files
Once all the distribution packages have been downloaded to your host machine, extract all the files at the root of your C:\ drive for instance. The package may be extracted to any location. After extracting all the files, the directory structure should look as illustrated in Installing HTTPs. In the example, all Micriµm products sub-folders shown in Installing HTTPs will be located in C:\Micrium\Software\. The Micriµm µC/OS-III RTOS has been chosen for this example.