Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

During the startup phase of the system, the CAN signal database must be initialized. This builds a linked list of unused CAN signal objects.

CAN signal database after initialization

  • The function CanSigInit() builds the internal CanSig Data Area. The figure above shows the situation of the CAN signal objects after the initialization.
  • In case of CANSIG_STATIC_CONFIG is enabled, the the signal database is not a linked list of CAN signal objects. Instead it is a simple list where the CAN signal objects are referenced in the order in which the CAN signals are defined. In this case CanSigCreate and CanSigDelete cannot be used.
    • No labels