Skip to end of metadata
  • Created by Former user, last modified by Former user on May 21, 2014
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

This function is called by a device driver to release the SPI lock and give the access to the SPI bus to other device’s hardware.

Files

net_bsp.c

Prototype

 

Note that since NetDev_WiFi_SPI_Unlock() is accessed only by function pointer via a BSP interface structure, it doesn’t need to be globally available and should therefore be declared as ‘static’.

Arguments

p_if

Pointer to specific interface to unlock.

Returned Value

None.

Required Configuration

None.

Notes / Warnings

  • 1 NetDev_WiFi_SPI_Unlock must be implemented if more than one hardware device share the same SPI bus.
  • 2 Since each network device requires a unique NetDev_WiFi_SPI_Unlock(), it is recommended that each device’s NetDev_WiFi_SPI_Unlock() function be named using the following convention:

NetDev_WiFi_[Device]SPI_Unlock[Number]()
[Device]

Network device name or type, e.g. RS9110 (optional if the development board does not support multiple devices)

[Number]

Network device number for each specific instance of device (optional if the development board does not support multiple instances of the specific device)

For example, the NetDev_WiFi_SPI_Unlock() function for the #2 RS9110 wireless device on an Atmel AT91SAM9263-EK should be named NetDev_WiFi_RS9110_SPI_Unlock2(), or NetDev_WiFi_RS9110_SPI_Unlock_2() with additional underscore optional.

See also section Network Board Support Package.

  • No labels