Page Comparison

This function is called by a device driver to initialize interface’s/device’s SPI bus.

Files

net_bsp.c

Prototype

          static CPU_INT32U NetDev_WiFi_SPI_Init (NET_IF  *p_if,
                                                  NET_ERR *p_err);

Note that since NetDev_WiFi_SPI_Init() is accessed only by function pointer via a BSP interface structure, it doesn’t need to be globally available and should therefore be declared as ‘static’.

...

Required Configuration

None.

Notes / Warnings

• 1 This function can configure the SPI mode by accessing the device configuration if no other device’s hardware sahre the same SPI bus.
• 2 Since each network device requires a unique NetDev_WiFi_SPI_Init(), it is recommended that each device’s NetDev_WiFi_SPI_Init() function be named using the following convention:

  NetDev_WiFi_[Device]SPI_Init[Number]()
[Device]

  Network device name or type. For example, RS9110 (optional if the development board does not support multiple devices)

[Number]

Network device number for each specific instance of device (optional if the development board does not support multiple instances of the specific device)

For example, the NetDev_WiFi_SPI_Init() function for the #2 RS9110 wireless device on an Atmel AT91SAM9263-EK should be named NetDev_WiFi_RS9110_SPI_Init2(), or NetDev_WiFi_RS9110_SPI_Init_2() with additional underscore optional.

...