Page Comparison

This function is called by a device driver to enable the SPI chip select of the wireless device.

Files

net_bsp.c

Prototype

          static CPU_INT32U NetDev_WiFi_SPI_ChipSelEn (NET_IF  *p_if,
                                                       NET_ERR *p_err);

Note that since NetDev_WiFi_SPI_ChipSelEn() is accessed only by function pointer via a BSP interface structure, it doesn’t need to be globally available and should therefore be declared as ‘static’.

...

• NetDev_WiFi_SPI_ChipSelEn() should be called only after the SPI lock has been acquired by calling NetDev_WiFi_SPI_Lock().
• Since each network device requires a unique NetDev_WiFi_SPI_ChipSelEn(), it is recommended that each device’s NetDev_WiFi_SPI_ChipSelEn() function be named using the following convention:

  NetDev_WiFi_[Device]SPI_ChipSelEn[Number]()
[Device]

  Network device name or type, e.g. RS9110 (optional if the development board does not support multiple devices)

[Number]

Network device number for each specific instance of device (optional if the development board does not support multiple instances of the specific device)

For example, the NetDev_WiFi_SPI_ChipSelEn() function for the #2 RS9110 wireless device on an Atmel AT91SAM9263-EK should be named NetDev_WiFi_RS9110_SPI_ChipSelEn2(), or NetDev_WiFi_RS9110_SPI_ChipSelEn_2() with additional underscore optional.

...