Page Comparison

This function is called by a device driver to initialize interface’s/device’s SPI bus.

Files

net_bsp.c

Prototype

...

          static CPU_INT32U NetDev_WiFi_SPI_Init (NET_IF  *p_if,
                                                  NET_ERR *p_err);

Note that since NetDev_WiFi_SPI_Init() is accessed only by function pointer via a BSP interface structure, it doesn’t need to be globally available and should therefore be declared as ‘static’.

Arguments

p_if

Pointer to specific interface to initialize the SPI.

...

Pointer to variable that will receive the return error code from this function:

NET_DEV_ERR_NONE
NET_DEV_ERR_FAULT

This is not an exclusive list of return errors and specific network device’s or device BSP functions may return any other specific errors as required.

Returned Value

None.

Required Configuration

None.

Notes / Warnings

• 1 This function can configure the SPI mode by accessing the device configuration if no other device’s hardware sahre the same SPI bus.
• 2 Since each network device requires a unique NetDev_WiFi_SPI_Init(), it is recommended that each device’s NetDev_WiFi_SPI_Init() function be named using the following convention:

  NetDev_WiFi_[Device]SPI_Init[Number]()
[Device]

  Network device name or type. For example, RS9110 (optional if the development board does not support multiple devices)

[Number]

Network device number for each specific instance of device (optional if the development board does not support multiple instances of the specific device)

...