...
net_bsp.c
Prototype
| Code Block |
|---|
static void NetDev_CfgIntCtrl (NET_IF *p_if,
NET_ERR *p_err); |
...
See also section Network Board Support Package.
Examples
| Code Block |
|---|
static void NetDev_WiFi_RS9110_CfgIntCtrl (NET_IF *p_if,
NET_ERR *p_err)
{
/* Configure AT91SAM9263-EK RS9110 #2's specific IF number. */
AT91SAM9263-EK__WiFi_RS9110_2_IF_Nbr = pif->Nbr;
/* Configure AT91SAM9263-EK RS9110 #2's interrupts: */
/* Configure interrupt vector. */
BSP_IntVectSet(BSP_INT, &NetDev_WiFi_RS9110_ISR_Handler_2);
BSP_IntEn(BSP_INT); /* Enable interrupts. */
*p_err = NET_DEV_ERR_NONE;
}
static void NetDev_WiFi_RS9110_CfgIntCtrlRx_2 (NET_IF *p_if,
NET_ERR *p_err)
{
/* Configure AT91SAM9263-EK RS9110 #2's specific IF number. */
AT91SAM9263-EK_WiFi_RS9110_2_IF_Nbr = pif->Nbr;
/* Configure AT91SAM9263-EK RS9110 #2's receive interrupt: */
/* Configure interrupt vector. */
BSP_IntVectSet(BSP_INT_RX, &NetDev_WiFi_RS9100_ISR_HandlerRx_2);
BSP_IntEn(BSP_INT_RX); /* Enable interrupt. */
*p_err = NET_DEV_ERR_NONE;
} |