...
Function Name | Description |
---|---|
NetIF_Add() | Add a network device and hardware as a network interface. |
Files
net_if.h/net_if.c
Prototype
Arguments
if_api
Pointer to the desired link-layer API for this network interface and device hardware. In most cases, the desired link-layer interface will point to the Ethernet API, NetIF_API_Ether
(see also section L16-1(1)).
dev_api
Pointer to the desired device driver API for this network interface (see also section 5-3-3 “Adding an Ethernet Interface” and section 5-4-2 “Adding a Wireless Interface”).
dev_bsp
Pointer to the specific device's BSP interface for this network interface (see also Chapter 6, “Network Board Support Package”).
dev_cfg
Pointer to a configuration structure used to configure the device hardware for the specific network interface (see also Chapter 5, “Network Interface Configuration”).
phy_api
Pointer to an optional physical layer device driver API for this network interface. In most cases, the generic physical layer device API will be used, NetPhy_API_Generic
, but for Ethernet devices that have non-MII or non-RMII compliant physical layer components, another device-specific physical layer device driver API may be necessary. See also section 7-4 “Ethernet PHY API Implementation”.
phy_cfg
Pointer to a configuration structure used to configure the physical layer hardware for the specific network interface (see also section 5-3-2 “Ethernet PHY Configuration”).
perr
Pointer to variable that will receive the return error code from this function:
NET_IF_ERR_NONE
NET_IF_ERR_NULL_PTR
NET_IF_ERR_INVALID_IF
NET_IF_ERR_INVALID_CFG
NET_IF_ERR_NONE_AVAIL
NET_BUF_ERR_POOL_INIT
NET_BUF_ERR_INVALID_POOL_TYPE
NET_BUF_ERR_INVALID_POOL_ADDR
NET_BUF_ERR_INVALID_POOL_SIZE
NET_BUF_ERR_INVALID_POOL_QTY
NET_BUF_ERR_INVALID_SIZE
NET_OS_ERR_INIT_DEV_TX_RDY
NET_OS_ERR_INIT_DEV_TX_RDY_NAME
NET_OS_ERR_LOCK
Returned Value
Network interface number, if device and hardware successfully added;
NET_IF_NBR_NONE
, otherwise.
Required Configuration
None.
Notes / Warnings
The first network interface added and started is the default interface used for all default communication. See also section C-12-1 and section C-12-2.
Both physical layer API and configuration parameters must ,either be specified or passed NULL
pointers.
Additional error codes may be returned by the specific interface or device driver.
...
NetIF_AddrHW_Get() | Get network interface’s hardware address. |
NetIF_AddrHW_IsValid() | Validate a network interface hardware address. |
NetIF_AddrHW_Set() | Set network interface’s hardware address. |
NetIF_CfgPerfMonPeriod() | Configure the network interface Performance Monitor Handler timeout. |
NetIF_CfgPhyLinkPeriod() | Configure network interface Physical Link State Handler timeout. |
NetIF_GetRxDataAlignPtr() | Get an aligned pointer into a receive application data buffer. |
NetIF_GetTxDataAlignPtr() | Get an aligned pointer into a transmit application data buffer. |
NetIF_GetExtAvailCtr() | Get number of external interface configured. |
NetIF_GetNbrBaseCfgd() | Get the base ID of the first external interface. |
NetIF_IO_Ctrl() | Handle network interface and/or device specific (I/O) control(s). |
NetIF_IsEn() | Validate network interface as enabled. |
NetIF_IsEnCfgd() | Validate configured network interface as enabled. |
NetIF_ISR_Handler() | Handle a network interface’s device interrupts. |
NetIF_IsValid() | Validate network interface number. |
NetIF_IsValidCfgd() | Validate configured network interface number. |
NetIF_LinkStateGet() | Get network interface’s last known physical link state. |
NetIF_LinkStateSubscribe() | Subscribe to get notified when an interface link state changes. |
NetIF_LinkStateUnsubscribe() | Unsubscribe to get notified when interface link state changes. |
NetIF_LinkStateWaitUntilUp() | Wait for a network interface's physical link state to be UP . |
NetIF_MTU_Get() | Get network interface’s MTU. |
NetIF_MTU_Set() | Set network interface’s MTU. |
NetIF_Start() | Start a network interface. |
NetIF_Stop() | Stop a network interface. |