Page Comparison

...

Pointer to variable that will receive the return error code from this function:

NET_DEV_ERR_NONE
NET_DEV_ERR_FAULT 

This is not an exclusive list of return errors and specific network device’s or device BSP functions may return any other specific errors as required.

...

• This function can configure the SPI mode by accessing the device configuration if no other device’s hardware sahre the same SPI bus.
• Since each network device requires a unique NetDev_WiFi_SPI_Init(), it is recommended that each device’s NetDev_WiFi_SPI_Init() function be named using the following convention:

  NetDev_WiFi_[Device]SPI_Init[Number]()
[Device]

  Network device name or type. For example, RS9110 (optional if the development board does not support multiple devices)

[Number]

Network device number for each specific instance of device (optional if the development board does not support multiple instances of the specific device)

For example, the NetDev_WiFi_SPI_Init() function for the #2 RS9110 wireless device on an Atmel AT91SAM9263-EK should be named NetDev_WiFi_RS9110_SPI_Init2(), or NetDev_WiFi_RS9110_SPI_Init_2() with additional underscore optional.

...