Page Comparison

...

• NetDev_WiFi_SPI_Unlock must be implemented if more than one hardware device share the same SPI bus.
• Since each network device requires a unique NetDev_WiFi_SPI_Unlock(), it is recommended that each device’s NetDev_WiFi_SPI_Unlock() function be named using the following convention:

  NetDev_WiFi_[Device]SPI_Unlock[Number]()
[Device]

  Network device name or type, e.g. RS9110 (optional if the development board does not support multiple devices)

[Number]

Network device number for each specific instance of device (optional if the development board does not support multiple instances of the specific device)

For example, the NetDev_WiFi_SPI_Unlock() function for the #2 RS9110 wireless device on an Atmel AT91SAM9263-EK should be named NetDev_WiFi_RS9110_SPI_Unlock2(), or NetDev_WiFi_RS9110_SPI_Unlock_2() with additional underscore optional.

...