...
Required Configuration
None.
Notes / Warnings
- 1
NetDev_WiFi_SPI_ChipSelEn() should be called only after the SPI lock has been acquired by calling NetDev_WiFi_SPI_Lock()
. - 2 Since each network device requires a unique
NetDev_WiFi_SPI_WrRd()
, it is recommended that each device’sNetDev_WiFi_SPI_WrRd()
function be named using the following convention:
NetDev_WiFi_[Device]SPI_WrRd[Number]()
[Device]
Network device name or type, e.g. RS9110 (optional if the development board does not support multiple devices)
[Number]
Network device number for each specific instance of device (optional if the development board does not support multiple instances of the specific device)
For example, the NetDev_WiFi_SPI_WrRd()
function for the #2 RS9110 wireless device on an Atmel AT91SAM9263-EK should be named NetDev_WiFi_RS9110_SPI_WrRd2()
, or NetDev_WiFi_RS9110_SPI_WrRd_2()
with additional underscore optional.
...