...
The features of the main window are described in the following section. Below is a screen shot of the main window:
Figure 8-2 NDIT Main Window
F8-2(1) The target’s communication log: The target received data is displayed in this scrollable text box.
F8-2(2) Test tabs: Each tab contains tests and test options:
...
F8-2(3) Test results table: Each tab has its own test results table that displays the input information and the output results for each test ,along with the date and time at which that test was executed. When the NDIT is launched, it loads the test results logs from previous tests and displays them in the test results table.
F8-2(4) Tests and test options: This section contains the different tests and test options that can be performed from the selected tab.
In addition to the options specified in the current test tab, there is another set of options located in the General Option tab. These options, like test duration and target IP address, are common to more than one test.
F8-2(5) Cancel button: When an iterative or a parameter sweep test is launched, it can be cancelled by clicking the Cancel button. The current test will finish and the results will be displayed in the test result table.
F8-2(6) Exit button: Upon clicking the Exit button, the test results will be saved, and connections, if any, will be closed with the target.