Page Comparison

...

Pointer to variable that will receive the return error code from this function:

NET_DEV_ERR_NONE

NET_DEV_ERR_FAULT

This is not an exclusive list of return errors and specific network device’s or device BSP functions may return any other specific errors as required.

...

Required Configuration

None.

Notes / Warnings

• 1 This function can configure the SPI mode by accessing the device configuration if no other device’s hardware sahre the same SPI bus.
• 2 Since each network device requires a unique NetDev_WiFi_SPI_Init(), it is recommended that each device’s NetDev_WiFi_SPI_Init() function be named using the following convention:

...