This function is called by a device driver to
enable or disable interface’s/device’s interrupt.
Files
net_bsp.c
Prototype
Note that since NetDev_WiFi_IntCtrl()
is accessed only by function pointer via a BSP interface structure, it doesn’t need to be globally available and should therefore be declared as ‘static
’.
...
For example, the NetDev_WiFi_IntCtrl()
function for the #2 RS9110 wireless device on an Atmel AT91SAM9263-EK should be named NetDev_WiFi_RS9110_IntCtrl2()
, or NetDev_WiFi_RS9110_IntCtrl_2()
with additional underscore optional.
See also Chapter 6, “Network section Network Board Support Package”Package.