This function is called by a device driver’s NetDev_Init()
to configure a specific network device’s general-purpose input/ouput output (GPIO) on a specific interface such as SPI, external interrupt, power & reset pins.
Files
net_bsp.c
Prototype
Code Block |
---|
static void NetDev_WiFi_CfgGPIO (NET_IF *p_if,
NET_ERR *p_err); |
Note that since NetDev_WiFi_CfgGPIO()
is accessed only by function pointer via a BSP interface structure, it doesn’t need to be globally available and should therefore be declared as ‘static
’.
...