Skip to end of metadata
  • Created by Former user, last modified by Former user on Feb 11, 2014
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

To use the SD/MMC SPI driver, five files, in addition to the generic file system files, must be included in the build:

  • fs_dev_sd.c
  • fs_dev_sd.h
  • fs_dev_sd_spi.c
  • fs_dev_sd_spi.h
  • fs_dev_sd_spi_bsp.c

The file fs_dev_sd_spi.h must also be #included in any application or header files that directly reference the driver (for example, by registering the device driver). The following directories must be on the project include path:

  • \Micrium\Software\uC-FS\Dev\SD
  • \Micrium\Software\uC-FS\Dev\SD\SPI

A single SD/MMC volume is opened as shown in . The file system initialization (FS_Init()) function must have previously been called.

ROM/RAM characteristics and performance benchmarks of the SD/MMC driver can be found in Driver Characterization. The SD/MMC driver also provides interface functions to get low-level card information and read the Card ID and Card-Specific Data registers (see FAT System Driver Functions).

If the SD/MMC initialization succeeds, the file system will produce the trace output as shown in (if a sufficiently high trace level is configured). See Trace Configuration about configuring the trace level.

  • No labels