Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Interface Configuration

This section describes the configuration definitions related to the CAN interface. The presented source code lines represents an example configuration and must be adapted to the project requirements.

This table defines the link to the CAN device driver, which shall be used for the CANopen CAN bus interface. Within the example above, the <xxx> represents the CAN controller identifier of the device driver (e.g. LPC24XX, STM32F10X, etc..)

  • No labels