FSDev_NOR_SST25 supports SST’s SST25 serial flash memories, as described in various datasheets at Numonyx (http://www.numonyx.com). This driver has been tested with or should work with the devices in the table below.
The M25P-series devices are programmed on a word (2-byte) basis and erased on a sector (4-KB) or block (32-KB) basis. The revision A devices and revision B devices differ slightly. Both have an Auto-Address Increment (AAI) programming mode. In revision A devices, the programming is performed byte-by-byte; in revision B devices, word-by-word. Revision B devices can also be erased on a 64-KB block basis and support a command to read a JEDEC-compatible ID.
Manufacturer | Device | Capacity | Block Size | Block Count |
SST | SST25VF010B | 1 Mb | 4-KB | 32 |
SST | SST25VF020B | 2 Mb | 4-KB | 64 |
SST | SST25VF040B | 4 Mb | 4-KB | 128 |
SST | SST25VF080B | 8 Mb | 32-KB | 32 |
SST | SST25VF016B | 16 Mb | 32-KB | 64 |
SST | SST25VF032B | 32 Mb | 32-KB | 128 |
Table 16-8 Supported SST25 serial flash