This section describes all the steps required to build a DHCPc-based application. The instructions provided in this section are not intended for any particular toolchain, but instead are described in a generic way that can be adapted to any toolchain.
The best way to start building a DHCPc-based project is to start from an existing µC/TCP-IP project.
Working project with µC/TCP-IP
The first step before including the µC/HTTPs is to have a working project with the µC/TCP-IP. As previously mentioned, Micriµm may offer starting example with µC/OS-III kernels and µC/TCP-IP and even with µC/HTTPs for many evalboards.
If no project that include µC/TCP-IP is available, you should follow the µC/TCP-IP Getting Started Guide to ensure to have a working project which use fix IP address before installing µC/HTTPs. Then you can follow the following steps to build and run a first µC/HTTPs sample application.
Including Additional Modules to the Project
Once you have a working project with your RTOS and µC/TCP-IP additional modules are needed by the Micriµm HTTP server that are not necessarily already included in your project. Therefore, be sure to add µC/CPU, µC/LIB and µC/TCP-IP to your project.
Refer to the following manuals for further information about MIcrium modules:.
Including µC/HTTPs Source Code
Include the following files in your project tree from the µC/HTTPs source code distribution, as indicated in Figure - µC/HTTPs Source Code.
As indicated in the Figure - µC/HTTPs Source Code, all the files in the Source folder must be added to your project tree. Furthermore, http-s_os.c file of the selected RTOS must be added as well as the generic http-s_os.h file that can be found in the OS folder.
For the file system, µC/HTTPs uses the network file system layer included with µC/TCP-IP located inside the uC-TCPIP/FS folder. Therefore, the file net_fs.h inside this folder must be include to your project, no matter what file system your HTTP server is using.
If a conventional file system is used, the port should be located also inside the uC-TCPIP/FS folder. A port for the µC/FS-V4 file system is already included in this folder. If a file system other than µC/FS is used, a port template is available inside the uC-TCPIP/FS/Template folder to be customize according to your file system.
If the Static file system is used, the port for this file system is located inside uC/HTTPs. Therefore, the source files http-s_fs_static.c/.h must be include to your project. They are located inside theMicrium/Software/uC-HTTPs/FS/Static folder. Furthermore, The configuration file template http-s_fs_static_cfg.h must be copied in your application directory. This configuration file can be retrieve inside the Micrium/Software/uC-HTTPs/FS/Static/Cfg/Template folder.
Finally, add the following include paths to your project’s C compiler settings:
\Micrium\Software\uC-HTTPs
\Micrium\Software\uC-TCPIP
\Micrium\Software\uC-<OS-Version>
Copying and Modifying Template Files
Copy the files from the uC-HTTPs configuration folder into your application as illustrated in Figure - Copying Template Files.
http-s_cfg.h is a configuration file used to setup µC/HTTPs module static parameters and features such as CGI form configuration, dynamic token replacement configuration, header field feature, proxy configuration and so on. Refer to section Module Configuration for more details on all the configurations inside http-s_cfg.h
The http-s_instance_cfg.c/.h pair of files, defines the configuration structure for an HTTP server’s instance (see µC/HTTPs Instance Configuration for more details). If your application requires a secured HTTP server instance, the http-s_instance_secure_cfg.c/.h pair of files should be used as template instead.
Modifying the HEAP memory configuration
The µC/HTTPs Module uses additional heap memory space. Therefore, it is possible that your sample application will require more allocation of heap memory. If ti is the case, you can increase the HEAP memory size of your sample project, refer to section µC/LIB Memory Management Configuration for more details on the heap usage.
Adding µC/HTTPs application function
Before running the sample application, you will need to add the new function call, in your application file to initialize and setup the µC/HTTPs module. Section Sample Application gives an example of how to initialize µC/HTTPs and start a web server instance.
This code example will need to be modified in accordance with your project.
Adding Additional includes
#include <Source/http-s.h>
#include <FS/uC-FS-V4/net_fs_v4.h> (optional if uC/FS is used)
#include <FS/Static/http-s_fs_static.h> (optional if no File system is available in the project)