OSTmrCreate()
void OSTmrCreate (OS_TMR *p_tmr,
CPU_CHAR *p_name,
OS_TICK dly,
OS_TICK period,
OS_OPT opt,
OS_TMR_CALLBACK_PTR p_callback,
void *p_callback_arg,
OS_ERR *p_err)
File |
Called from |
Code enabled by |
os_tmr.c |
Task only |
OS_CFG_TMR_EN |
OSTmrCreate() allows the user to create a software timer. The timer can be configured to run continuously (opt set to OS_TMR_OPT_PERIODIC), or only once (opt set to OS_TMR_OPT_ONE_SHOT). When the timer counts down to 0 (from the value specified in period), an optional “callback” function can be executed. The callback can be used to signal a task that the timer expired, or perform any other function. However, it is recommended to keep the callback function as short as possible.
The timer is created in the “stop” mode and therefore the user must call OSTmrStart() to actually start the timer. If configuring the timer for ONE-SHOT mode, and the timer expires, you need to call OSTmrStart() to retrigger the timer, call OSTmrDel() to delete the timer if it is not necessary to retrigger it, or not use the timer anymore. Note: you can use the callback function to delete the timer if using the ONE-SHOT mode.
PERIODIC MODE (see “opt”) – dly > 0, period > 0
PERIODIC MODE (see “opt”) – “dly == 0, period > 0
ONE-SHOT MODE (see “opt”) – dly > 0, period == 0
Arguments
p_tmr
is a pointer to the timer-control block of the desired timer. It is assumed that storage for the timer will be allocated in the application. In other words, you should declare a “global” variable as follows, and pass a pointer to this variable to OSTmrCreate():
OS_TMR MyTmr;
p_name
is a pointer to an ASCII string (NUL terminated) used to assign a name to the timer. The name can be displayed by debuggers or µC/Probe.
dly
specifies the initial delay (specified in timer tick units) used by the timer (see drawing above). If the timer is configured for ONE-SHOT mode, this is the timeout used. If the timer is configured for PERIODIC mode, this is the timeout to wait before the timer enters periodic mode. The units of this time depends on how often the user will call OSTmrSignal() (see OSTimeTick()). If OSTmrSignal() is called every 1/10 of a second (i.e., OS_CFG_TMR_TASK_RATE_HZ set to 10), dly specifies the number of 1/10 of a second before the delay expires.
period
specifies the period repeated by the timer if configured for PERIODIC mode. You would set the “period” to 0 when using ONE-SHOT mode. The units of time depend on how often OSTmrSignal() is called. If OSTmrSignal() is called every 1/10 of a second (i.e., OS_CFG_TMR_TASK_RATE_HZ set to 10), the period specifies the number of 1/10 of a second before the timer repeats.
opt
is used to specify whether the timer is to be ONE-SHOT or PERIODIC:
OS_OPT_TMR_ONE_SHOT specifies ONE-SHOT mode
OS_OPT_TMR_PERIODIC specifies PERIODIC mode
p_callback
is a pointer to a function that will execute when the timer expires (ONE-SHOT mode), or every time the period expires (PERIODIC mode). A NULL pointer indicates that no action is to be performed upon timer expiration. The callback function must be declared as follows:
void MyCallback (OS_TMR *p_tmr, void *p_arg);
When called, the callback will be passed the pointer to the timer as well as an argument (p_callback_arg), which can be used to indicate to the callback what to do. Note that the user is allowed to call all of the timer related functions (i.e., OSTmrCreate(), OSTmrDel(), OSTmrStateGet(), OSTmrRemainGet(), OSTmrStart(), and OSTmrStop()) from the callback function.
Do not make blocking calls within callback functions.
p_callback_arg
is an argument passed to the callback function when the timer expires (ONE-SHOT mode), or every time the period expires (PERIODIC mode). The pointer is declared as a “void *” so it can point to any data.
p_err
is a pointer to a variable that contains an error code returned by this function.
Returned Values
None.
Notes/Warnings
Do not call this function from an ISR.
The timer is not started when it is created. To start the timer, simply call OSTmrStart().
Do not make blocking calls within callback functions.
Keep callback functions as short as possible.
Example
OS_TMR CloseDoorTmr;
void Task (void *p_arg) { OS_ERR err;
(void)&p_arg; while (DEF_ON) { OSTmrCreate(&CloseDoorTmr, /* p_tmr */ “Door close” /* p_name */ 10, /* dly */ 100, /* period */ OS_OPT_TMR_PERIODIC, /* opt */ DoorCloseFnct, /* p_callback */ 0, /* p_callback_arg */ &err); /* p_err */ /* Check “err” */ } }
void DoorCloseFnct (OS_TMR *p_tmr, void *p_arg) { /* Close the door! */ } |