Trace Tools: SEGGER SystemView for µC/OS-II
SystemView consists of a Trace Recorder and a host application to analyze the Trace.
The image on the right hand side shows the host application displaying the events table and timeline for a typical µC/OS-II based application. These are two of the most important views offered by the tool.
This section will guide you through the steps necessary to setup SEGGER SystemView as the Trace Recorder tool for µC/OS-II.
In particular, this section will describe the following steps:
- Step 1: Including the Trace Recorder
- Step 2: Configuring the Trace Recorder
- Step 3: Initializing the Trace Recorder
- Step 4: Starting the Trace Recorder
For more information on SystemView, including how to analyze the trace, see the SystemView Documentation from SEGGER's website at https://www.segger.com/systemview.html
