Page Comparison

...

Anchor10186111018611 Project Example Anchor10186151018615 Figure 8-4 The figure below shows the workspace with groups expanded for a development board with NDIT and IPerf modules included.anchor

10037241003724The APP group is where the actual code for the example is located. Anchor10037251003725

The BSP group contains the 'Board Support Package' code to use for several of the Input/Output (I/O) devices on the development board. Anchor10037261003726

The NDIT group contains the necessary files to interact with the NDIT software on the test station host. In hold the executive code for the test procedures describes in Section 10 of this document. Anchor10037271003727

The µC/CPU group contains source and header files for the µC/CPU module. Header files contain definitions and declaration that are required by some of the application code.

Anchor10037281003728The µC/IPerf group contains the source and header for the µC/IPerf module. It also contains the IPerf Reporter module which formats and displays IPerf's test results.anchor

10037291003729The µC/LIB group contains the source and header for the µC/LIB module. Again, the header files are needed as some of the application code requires definitions and declarations found in these files. Anchor10037301003730

The µC/OS-III group contains the source and header files for the µC/OS-III module. Anchor10037311003731

The µC/TCP-IP group contains the source and header files for the µC/TCP-IP module. Anchor10037321003732 Image Removed

...