Page Comparison

CPU_BOOLEAN FSDev_BSP_SPI_Open (FS_QTY unit_nbr);

Open (initialize) hardware for SPI.

Arguments

unit_nbr

Unit number of device.

Returned Value

DEF_OK, if interface was opened.

DEF_FAIL, otherwise.

Notes/Warnings

1. This function will be called every time the device is opened.
2. Several aspects of SPI communication may need to be configured, including:
   • Transfer unit length
   • Shift direction
   • Clock frequency
   • Clock polarity and phase (CPOL and CPHA)
   • Slave select polarity
3. For a SD/MMC card, the following settings should be used:
   • Transfer unit length: 8-bits
   • Shift direction: MSB first
   • Clock frequency: 400-kHz (initially)
   • Clock polarity and phase (CPOL and CPHA): CPOL = 0, CPHA = 0
   • Slave select polarity: active low.
4. The slave select (SSEL or CS) must be configured as a GPIO output; it should not be controlled by the CPU’s SPI peripheral. The SPI port’s ChipSelEn() and ChipSelDis() functions manually enable and disable the SSEL.