...
A repository can be installed globally or locally, When installed globally it will be available across all workspace without having to register the BSP in each workspace. However, to prevent conflicting with other BSPs it is recommended to install the Micrium BSP only in the required workspaces.
| Note |
|---|
It is possible to install more than one version of the repository in the same workspace. However Micrium does not support "mix and matching" components and drivers between repository versions. |
Installation instructions
...
1. Open the repository add dialog from the Xilinx Tools->Repositories menu
...
3. Browse to the repository location and click Ok - The ucos sub-directory should be selected as shown in in Xilinx SDK software repository add dialog
Anchor Figure - Xilinx SDK software repository add dialog Figure - Xilinx SDK software repository add dialog
Figure - Xilinx SDK software repository add dialog
| Figure - Xilinx SDK software repository add dialog | |
| Figure - Xilinx SDK software repository add dialog |
4. Verify installation
To verifythat the repository is correctly registered you can try to generate a BSP with the File->New Board Support Package.The "ucos" BSP should be available in the list of supported BSPs.
Upgrade instructions
The recommended approach when upgrading to a new version of the μ C/OS BSP is to create a brand new BSP instead of updating the existing ones. To upgrade the BSP version in an existing workspace Micrium recommends the following workflow :
...
After applying the previous steps, re-open the BSP configuration pane and update the version of every Micrium drivers used in the BSP to the latest version.