| Table of Contents |
|---|
Terminal Reporter on the
...
Target
If your target board has a serial interface, you should use the Terminal Reporter. You must create a function which will transmit a string buffer via the serial interface. The NDIT module must be able to use this function to send back the menu or any command errors. The listing below shows an example.
...
Note that you must initialize µC/IPerf before using the “Terminal Reporter.”
Server Reporter on the
...
Target
You can also use the network interface of your device to send commands to the NDIT. This way, if you don't have a Serial Port on your device, you can still send commands and receive results through the NDIT_TaskServer() task and NDIT_NetOutputFnct() display function.
...