Receive application data via socket, with error handling. See section C-13-46 for more information.
Files
net_app.h/net_app.c
Prototype
Arguments
sock_id
This is the socket ID returned by NetApp_SockOpen()/
NetSock_Open()/socket()
when the socket was created or by NetApp_SockAccept()/NetSock_Accept()/accept()
when a connection was accepted.
...
Flag to select receive options; bit-field flags logically OR’d:
NET_SOCK_FLAG_NONE/0
No socket flags selected
NET_SOCK_FLAG_RX_DATA_PEEK/
MSG_PEEK
Receive socket data without consuming it
NET_SOCK_FLAG_RX_NO_BLOCK/
MSG_DONTWAIT
Receive socket data without blocking
In most cases, this flag would be set to NET_SOCK_FLAG_NONE/0
.
...
Pointer to variable that will receive the error code from this function:
NET_APP_ERR_NONE
NET_APP_ERR_INVALID_ARG
NET_APP_ERR_INVALID_OP
NET_APP_ERR_FAULT
NET_APP_ERR_FAULT_TRANSITORY
NET_APP_ERR_CONN_CLOSED
NET_APP_ERR_DATA_BUF_OVF
NET_ERR_RX
Returned Value
Number of data bytes received, if no errors.
0
, otherwise.
Required Configuration
Available only if NET_APP_CFG_API_EN
is enabled (see section D-18-1) and either NET_CFG_TRANSPORT_LAYER_SEL
is configured for TCP (see section D-12-1) and/or NET_UDP_CFG_APP_API_SEL
is configured for sockets (see section D-13-1).
Notes / Warnings
Some socket arguments and/or operations are validated only if validation code is enabled (see section D-3-1).
If a non-zero number of retries is requested (retry_max
) and socket blocking is configured for non-blocking operation (see section D-15-3); then a non-zero timeout (timeout_ms
) and/or a non-zero time delay (time_dly_ms
) should also be requested. Otherwise, all retries will most likely fail immediately since no time will elapse to wait for and allow socket operations to successfully complete.