...
This example is based on template files so some modifications will be required, insert the appropriate project/board specific code to perform the stated actions. Note that the file init_multiple_if.c, located in the folder $/Micrium/Software/uC-TCPIP/Examples/Init, contains this example sample application:
| Code Block | ||||
|---|---|---|---|---|
| ||||
#include <cpu_core.h>
#include <lib_mem.h>
#include <Source/net.h>
#include <Source/net_ascii.h>
#include <IF/net_if.h>
#include <IF/net_if_wifi.h>
#ifdef NET_IPv4_MODULE_EN
#include <IP/IPv4/net_ipv4.h>
#endif
#ifdef NET_IPv6_MODULE_EN
#include <IP/IPv6/net_ipv6.h>
#endif
#include <Cfg/Template/net_dev_cfg.h> /* Device configuration header. */
#include <Dev/Ether/Template/net_dev_ether_template_dma.h> /* Device driver header. */
#include <Dev/WiFi/Template/net_dev_wifi_template_spi.h> /* Device driver header. */
#include <Dev/Ether/PHY/Generic/net_phy.h> /* PHY driver header. */
#include <Dev/WiFi/Manager/Generic/net_wifi_mgr.h>
#include <BSP/Template/net_bsp_ether.h> /* BSP header. */
#include <BSP/Template/net_bsp_wifi.h> /* BSP header. */
CPU_BOOLEAN AppInit_TCPIP_MultipleIF (void)
{
#ifdef NET_IPv4_MODULE_EN
NET_IPv4_ADDR addr_ipv4;
NET_IPv4_ADDR msk_ipv4;
NET_IPv4_ADDR gateway_ipv4;
#endif
#ifdef NET_IPv6_MODULE_EN
CPU_BOOLEAN cfg_result;
#if (NET_IPv6_CFG_ADDR_AUTO_CFG_EN == DEF_DISABLED)
NET_FLAGS ipv6_flags;
NET_IPv6_ADDR addr_ipv6;
#endif
#endif
NET_IF_NBR if_nbr_ether;
NET_IF_NBR if_nbr_wifi;
NET_IF_WIFI_AP ap[10];
NET_IF_WIFI_SSID *p_ssid;
NET_IF_WIFI_SSID ssid;
NET_IF_WIFI_PSK psk;
CPU_INT16U ctn;
CPU_INT16U i;
CPU_INT16S result;
CPU_BOOLEAN found;
NET_ERR err_net;
/* -------- INITIALIZE NETWORK TASKS & OBJECTS -------- */
err_net = Net_Init(&NetRxTaskCfg,
&NetTxDeallocTaskCfg,
&NetTmrTaskCfg);
if (err_net != NET_ERR_NONE) {
return (DEF_FAIL);
}
/* -------------- ADD ETHERNET INTERFACE -------------- */
if_nbr_ether = NetIF_Add((void *)&NetIF_API_Ether,
(void *)&NetDev_API_TemplateEtherDMA, /* Device driver API */
(void *)&NetDev_BSP_BoardDev_Nbr, /* BSP API */
(void *)&NetDev_Cfg_Ether_1, /* Device configuration */
(void *)&NetPhy_API_Generic, /* PHY driver API */
(void *)&NetPhy_Cfg_Ether_1, /* PHY configuration */
&err_net);
if (err_net != NET_IF_ERR_NONE) {
return (DEF_FAIL);
}
/* ------------- START ETHERNET INTERFACE ------------- */
NetIF_Start(if_nbr_ether, &err_net); /* Makes the interface ready to receive and transmit. */
if (err_net != NET_IF_ERR_NONE) {
return (DEF_FAIL);
}
#ifdef NET_IPv4_MODULE_EN
/* --------- CONFIGURE IPV4 STATIC ADDRESSES ---------- */
/* For Dynamic IPv4 configuration, µC/DHCPc is required */
/* Update IPv4 Addresses following your network ... */
/* ... requirements. */
NetASCII_Str_to_IP("10.10.10.64", /* Convert Host IPv4 string address to 32 bit address. */
&addr_ipv4,
NET_IPv4_ADDR_SIZE,
&err_net);
NetASCII_Str_to_IP("255.255.255.0", /* Convert IPv4 mask string to 32 bit address. */
&msk_ipv4,
NET_IPv4_ADDR_SIZE,
&err_net);
NetASCII_Str_to_IP("10.10.10.1", /* Convert Gateway string address to 32 bit address. */
&gateway_ipv4,
NET_IPv4_ADDR_SIZE,
&err_net);
NetIPv4_CfgAddrAdd(if_nbr_ether, /* Add a statically-configured IPv4 host address, ... */
addr_ipv4, /* ... subnet mask, & default gateway to the ... */
msk_ipv4, /* ... interface. */
gateway_ipv4,
&err_net);
if (err_net != NET_IPv4_ERR_NONE) {
return (DEF_FAIL);
}
#endif
#ifdef NET_IPv6_MODULE_EN
#if (NET_IPv6_CFG_ADDR_AUTO_CFG_EN == DEF_ENABLED)
/* ----- START IPV6 STATELESS AUTO-CONFIGURATION ------ */
NetIPv6_AddrAutoCfgHookSet(if_nbr_ether, /* Set Hook function to received Auto-Cfg result. */
&App_AutoCfgResult,
&err_net);
cfg_result = NetIPv6_AddrAutoCfgEn(if_nbr_ether, /* Enable and Start Auto-Configuration process. */
DEF_YES,
&err_net);
if (cfg_result == DEF_FAIL) {
return (DEF_FAIL);
}
#else
/* ----- CONFIGURE IPV6 STATIC LINK LOCAL ADDRESS ----- */
/* DHCPv6c is not yet available. */
/* TODO Update IPv6 Address following your network ... */
/* ... requirements. */
NetASCII_Str_to_IP("fe80::1111:1111", /* Convert IPv6 string address to 128 bit address. */
&addr_ipv6,
NET_IPv6_ADDR_SIZE,
&err_net);
ipv6_flags = 0;
DEF_BIT_SET(ipv6_flags, NET_IPv6_FLAG_BLOCK_EN); /* Set Address Configuration as blocking. */
DEF_BIT_SET(ipv6_flags, NET_IPv6_FLAG_DAD_EN); /* Enable DAD with Address Configuration. */
cfg_result = NetIPv6_CfgAddrAdd(if_nbr_ether, /* Add a statically-configured IPv6 host address to ... */
&addr_ipv6, /* ... the interface. */
64,
ipv6_flags,
&err_net);
if (cfg_result == DEF_FAIL) {
return (DEF_FAIL);
}
#endif
#endif
/* -------------- ADD WIRELESS INTERFACE -------------- */
if_nbr_wifi = NetIF_Add((void *)&NetIF_API_WiFi,
(void *)&NetDev_API_TemplateWiFiSpi, /* Change following your Device driver API. */
(void *)&NetDev_BSP_WiFi, /* Change for your BSP API. */
(void *)&NetDev_Cfg_WiFi_1, /* Change for Device configuration. */
(void *)&NetWiFiMgr_API_Generic,
DEF_NULL,
&err_net);
if (err_net != NET_IF_ERR_NONE) {
return (DEF_FAIL);
}
/* ------------- START WIRELESS INTERFACE ------------- */
NetIF_Start(if_nbr_wifi, &err_net); /* Makes the interface ready to receive and transmit. */
if (err_net != NET_IF_ERR_NONE) {
return (DEF_FAIL);
}
/* ------------ SCAN FOR WIRELESS NETWORKS ------------ */
ctn = NetIF_WiFi_Scan(if_nbr_wifi,
ap, /* Access point table. */
10, /* Access point table size. */
DEF_NULL, /* Hidden SSID. */
NET_IF_WIFI_CH_ALL, /* Channel to scan. */
&err_net);
if (err_net != NET_IF_WIFI_ERR_NONE) {
return (DEF_FAIL);
}
/* --------- ANALYSE WIRELESS NETWORKS FOUND ---------- */
found = DEF_NO;
for (i = 0; i < ctn - 1; i++) { /* Browse table of access point found. */
p_ssid = &ap[i].SSID;
result = Str_Cmp_N((CPU_CHAR *)p_ssid, /* Search for a specific Wireless Network SSID. */
"Wifi_AP_SSID", /* Change for your WiFi Network SSID. */
NET_IF_WIFI_STR_LEN_MAX_SSID);
if (result == 0) {
found = DEF_YES;
break;
}
}
if (found == DEF_NO) {
return (DEF_FAIL);
}
/* ------------- JOIN A WIRELESS NETWORK -------------- */
Mem_Clr(&ssid, sizeof(ssid));
Mem_Clr(&psk, sizeof(psk));
Str_Copy_N((CPU_CHAR *)&ssid,
"Wifi_AP_SSID", /* Change for your WiFi Network SSID. */
12); /* SSID string length. */
Str_Copy_N((CPU_CHAR *)&psk,
"Password", /* Change for your WiFi Network Password. */
8); /* PSK string length. */
NetIF_WiFi_Join(if_nbr_wifi,
ap[i].NetType, /* WiFi Network type. */
NET_IF_WIFI_DATA_RATE_AUTO, /* Data rate. */
ap[i].SecurityType, /* WiFi Network security type. */
NET_IF_WIFI_PWR_LEVEL_HI, /* Power level. */
ssid, /* WiFi Network SSID. */
psk, /* WiFi Network PSK. */
&err_net);
if (err_net != NET_IF_WIFI_ERR_NONE) {
return (DEF_FAIL);
}
#ifdef NET_IPv4_MODULE_EN
/* --------- CONFIGURE IPV4 STATIC ADDRESSES ---------- */
/* For Dynamic IPv4 configuration, µC/DHCPc is required */
/* Update IPv4 Addresses following your network ... */
/* ... requirements. */
NetASCII_Str_to_IP("192.168.1.10", /* Convert Host IPv4 string address to 32 bit address. */
&addr_ipv4,
NET_IPv4_ADDR_SIZE,
&err_net);
NetASCII_Str_to_IP("255.255.255.0", /* Convert IPv4 mask string to 32 bit address. */
&msk_ipv4,
NET_IPv4_ADDR_SIZE,
&err_net);
NetASCII_Str_to_IP("192.168.1.1", /* Convert Gateway string address to 32 bit address. */
&gateway_ipv4,
NET_IPv4_ADDR_SIZE,
&err_net);
NetIPv4_CfgAddrAdd(if_nbr_wifi, /* Add a statically-configured IPv4 host address, ... */
addr_ipv4, /* ... subnet mask, & default gateway to the ... */
msk_ipv4, /* ... interface. */
gateway_ipv4,
&err_net);
if (err_net != NET_IPv4_ERR_NONE) {
return (DEF_FAIL);
}
#endif
#ifdef NET_IPv6_MODULE_EN
#if (NET_IPv6_CFG_ADDR_AUTO_CFG_EN == DEF_ENABLED)
/* ----- START IPV6 STATELESS AUTO-CONFIGURATION ------ */
NetIPv6_AddrAutoCfgHookSet(if_nbr_wifi, /* Set hook function to received Auto-Cfg result. */
&App_AutoCfgResult, /* TODO update pointer to hook fnct implemented in App. */
&err_net);
cfg_result = NetIPv6_AddrAutoCfgEn(if_nbr_wifi, /* Enable and Start Auto-Configuration process. */
DEF_YES,
&err_net);
if (cfg_result == DEF_FAIL) {
return (DEF_FAIL);
}
#else
/* ----- CONFIGURE IPV6 STATIC LINK LOCAL ADDRESS ----- */
/* DHCPv6c is not yet available. */
/* Update IPv6 Address following your network ... */
/* ... requirements. */
NetASCII_Str_to_IP("fe80::4444:1111", /* Convert IPv6 string address to 128 bit address. */
&addr_ipv6,
NET_IPv6_ADDR_SIZE,
&err_net);
ipv6_flags = 0;
DEF_BIT_SET(ipv6_flags, NET_IPv6_FLAG_BLOCK_EN); /* Set Address Configuration as blocking. */
DEF_BIT_SET(ipv6_flags, NET_IPv6_FLAG_DAD_EN); /* Enable DAD with Address Configuration. */
cfg_result = NetIPv6_CfgAddrAdd(if_nbr_wifi, /* Add a statically-configured IPv6 host address to ... */
&addr_ipv6, /* ... the interface. */
64,
ipv6_flags,
&err_net);
if (cfg_result == DEF_FAIL) {
return (DEF_FAIL);
}
#endif
return (DEF_OK);
} |
| Info |
|---|
Refer to the example sample codes in section Ethernet example Sample Application and WiFi example Sample Application for more details on the diverse function calls. |