...
- Toolchain for your specific microcontroller.
- Development board.
- Source code for the µC/TCPI-IP stack.
- Source code for all the other Micriµm modules required by the µC/TCPI-IP stack (see section Installing the µC/TCP-IP Stack)
- Interface device driver compatible with your hardware for the µC/TCP-IP stack (Ethernet + PHY driver or WiFi driver).*
- Board support package (BSP) for your development board.*
- A running project for your selected RTOS.
Info | ||
---|---|---|
| ||
* If Micrium does not support your network device driver, you will have to write your own device driver. The same goes for your BSP. However, you can contact Micriµm (support@micrium.com) to see if a BSP example exists for your development board to help you get started. Refer to section µC/TCPIP Driver Manual for more information on writing your own Ethernet or WiFi device driver and section Network Board Support Package for writing your own BSP. |
Additional Modules
µC/TCP-IP depends on other modules to run. First, it needs the presence of a RTOS. Futhermore, µC/CPU, µC/LIB and µC/Common modules are required.
...