...
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
MyShortISR: (1)
Save enough registers as needed by the ISR; (2)
Clear interrupting device; (3)
DO NOT re-enable interrupts; (4)
Call user ISR; (5)
Restore the saved CPU registers; (6)
Return from interrupt; (7) |
| Code Blockpanel |
|---|
(1) As mentioned above, an ISR is typically written in assembly language. MyShortISR corresponds to the name of the handler that will handle the interrupting device. (2) Here, you save sufficient registers as required to handle the ISR. (3) The user probably needs to clear the interrupting device to prevent it from generating the same interrupt once the ISR returns. (4) Do not re-enable interrupts at this point since another interrupt could make µC/OS-III calls, forcing a context switch to a higher-priority task. This means that the above ISR would complete, but at a much later time and, possible cause other complications. (5) Now you can take care of the interrupting device in assembly language or call a C function, if necessary. (6) Once finished, simply restore the saved CPU registers. (7) Perform a return from interrupt to resume the interrupted task. |