...
The M25P-series devices are programmed on a word (2-byte) basis and erased on a sector (4-KB) or block (32-KB) basis. The revision A devices and revision B devices differ slightly. Both have an Auto-Address Increment (AAI) programming mode. In revision A devices, the programming is performed byte-by-byte; in revision B devices, word-by-word. Revision B devices can also be erased on a 64-KB block basis and support a command to read a JEDEC-compatible ID.
| Panel |
|---|
| borderWidth | 0 |
|---|
| title | Table - Supported SST25 serial flash |
|---|
|
Manufacturer | Device | Capacity | Block Size | Block Count |
|---|
SST | SST25VF010B | 1 Mb | 4-KB | 32 | SST | SST25VF020B | 2 Mb | 4-KB | 64 | SST | SST25VF040B | 4 Mb | 4-KB | 128 | SST | SST25VF080B | 8 Mb | 32-KB | 32 | SST | SST25VF016B | 16 Mb | 32-KB | 64 | SST | SST25VF032B | 32 Mb | 32-KB | 128 |
|