Starting the TraceAlyzer Streaming Recorder
To start recording you need the host application, TraceAlyzer for µC/OS-III, which works with both the streaming and snapshot recorders. The tool can be downloaded from the following link: http://percepio.com/tz/
...
Finally, to start a recording click File -> Connect to Target System... and you will be presented with the dialog window shown in Figure TraceAlyzer - Streaming Status Window. At this point, assuming that the embedded application and µC/OS-III are running you can click the button Start Recording .
Recording Status
During the streaming process, you will be presented with a window similar to the one shown in Figure TraceAlyzer - Streaming Status Window.
...
- Run TraceAlyzer stand-alone without a debugger and/or µC/Probe.
Further Reading
For additional and more detailed coverage of TraceAlyzer refer to the TraceAlyzer Documentation.